Aphroli · blank bottle reference shots

All three sizes, cap off. Small was approved first; medium and large were generated from the approved small shot plus your three-size photos (neck kept identical across sizes). Each shot sits beside the real photo it was checked against.

Three sizes together

Scale board: the front shots placed at your bottles' measured size step. Not a photo. A generated three-bottle photo failed twice (the necks grew with each size), so it is held back.

Reply Keep / Revise / Reject per shot. Nothing becomes a reference until you say Keep.

With labels

One double-sided sticker on the front panel: type face outside (gold foil + black ink), portrait printed on the sticky side, seen from behind through the glass and perfume. No label on the back. Filled with pale gold perfume.

Aphroli box v3 (new)

Rigid black wrap with a tone-on-tone debossed lily pattern, no text outside, gold-edged window. Flaps held shut by magnets hidden in the board at the flap tips. Ivory linen lid with gold seam line and matching cut-out; black gold-printed tissue, black velvet insert. All three states share one footprint (within ~3%).

**2 · Flaps open** · plain black insides, same notches

**3 · Lid off** · label ~40 px below where the cut-out sits

Box fronts · pick one (new)

Same box, size, light and label; only the front changes. Inspired by what you liked: the sunken black interior. No text on any.

**1 · Pure** · plain matte black, gold bevel window

**2 · Sunken** · stepped oval terraces down into the window, like the bottle bed

**3 · Lacquer** · piano-black gloss, raised gold bezel

**4 · Velvet** · outside wrapped in the same black velvet as the insert

**5 · Fluted** · fine vertical ribs, Art Deco

**6 · Label frame** · the label's own frame, scaled up, blind-embossed

New opening concepts (new) · closed | open

Each open shot was generated from its own closed shot. No text on any box.

**A · Matchbox drawer** · ribbon pull slides the velvet tray out; the window stays on the sleeve

**B · Book box** · magnetic cover with sunken oval rings swings open on a spine

**C · Lift-off lid** · deep lid over a base, gold line where they meet

**D · Drop-front, upright** · front panel folds down, bottle stands in a velvet niche. Open shot NOT consistent yet: dropped panel too wide (failed twice)

Box v4 · from one 3D model (new)

Every shot is built on a render of one exact 3D model (mm dimensions), so size, holes and pieces stay identical: black magnetic sleeve (tube, two flaps, 4 magnets in the flap tips) + white two-piece box (base holding the bottle, lid with oval cut-out and 4 matching magnets). Window and cut-out 40 x 50 mm over the 44 x 54 mm label.

**Flaps open · magnets at the flap tips**

**Sleeve off, unfolded · white box closed**

**Lid off · lid on the sleeve, bottle in the base**

**Sleeve sliding off the end, flaps shut**

Magnet close-ups:

Nº02 editorial · embossed gold-foil label (new)

Each full-bottle shot passed the overlay against your real bottle (pink line on the check images).

**Still life · travertine, window light**

Shape check vs your bottle: PASS (width ÷ height 3% narrow)

**Wordmark close-up** · embossed frame, APHROLI and monogram; small text flat

Shape check: your real bottle at this angle (left) vs the shot: rounded corners and side wall match

Nº02 front · emboss + foil print spec (new)

Vector, built from the designer PDF, die lines unchanged (L 53.97×67.73, M 44.27×54.36, S 37.29×45.65 mm). Blue = embossed + gold foil (frame, APHROLI wordmark, AR monogram). Small text = foil only. Nº02 = white ink.

Spec PDF (4 pages: artwork+die, foil plate, emboss plate, proof) · foil plate SVG · emboss plate SVG · artwork SVG

Shape check against your real bottle (new)

Green = my tracing of your real small bottle (edge-detected, then checked by eye at the base and shoulder). The earlier tracing was wrong (too wide and square at the bottom).

**Overlay** · pink = your real outline. The original small, medium and large blanks match it. Right: the boxy version I made from the bad tracing, which does not match (withdrawn).

Darker glass test · Nº02 (new)

Same shots, glass tinted to the darker smoke of the supplier sample renders.

**All three** · left: current glass · right: darker smoked glass

**Medium · front** · left: current glass · right: darker smoked glass

**Medium · from behind** · left: current glass · right: darker smoked glass

Nº02 · the man (new) · copper caps, copper foil

**All three, middle bottle turned around** M7-group-a6-1536x1024

**Large · rear three-quarter** M3-L-rear34-a4-1024x1536

**Large · front-left** M5-L-front-left34-a3-1024x1536

**Small · raised from behind** M6-S-backraised-a3-1024x1536

**Small · from behind** M4-S-back-a3-1024x1536

Label option 01 · brass caps

Label option 02 · black caps

Label option 03 · copper caps

Label option 04 · brass caps

The back (new)

The back is flat glass with the front outline; you see through it to the front panel. Real-photo evidence: BTL-02, BTL-07.

**All three from behind** · Matches your three-size photo of the backs. G7-back34-a1-1536x1024

**Small · straight back** · Flat back; front panel shows through as a ghost. S-back-a1-1024x1536

**Small · back three-quarter** · Flat back plus side wall. S-back34-a1-1024x1536

**Small · raised back** · Check: the panel edge reads crisp, could look like the front. S-backelev-a1-1024x1536

**Medium · straight back** · M-back-a1-1024x1536

**Large · straight back** · L-back-a1-1024x1536

All three together

Generated as one photograph each, using a measured size guide so the neck stays one size. Cap size is an estimate until a cap-on photo; the collar ring under each ball is a guess from the black sample.

**Front, caps off** · G1-front-a1-1536x1024

**Three-quarter, caps off** · G2-34-a1-1536x1024

**Raised, caps off** · G3-elev-a1-1536x1024

**Front, capped: copper / black / brass** · G4-front-caps-a4-1536x1024

**Three-quarter, black caps on small + large** · G5-34-mixed-a2-1536x1024

**Raised, brass caps** · G6-elev-caps-a2-1536x1024

Single shots

Small · front Kept by you

Operator Keep 2026-10-09.

S-front-a1 · compared with real photo BTL-14 · overlay: blue = your bottle, magenta = generated, diagnostic only

Small · three-quarter Kept by you

Operator Keep 2026-10-09.

S-34-a1 · compared with real photo BTL-09 · pose-unlocked, no overlay possible

Small · hard side Kept by you

Operator Keep 2026-10-09.

S-side-a1 · compared with real photo BTL-11 · overlay: blue = your bottle, magenta = generated, diagnostic only

Small · raised three-quarter Kept by you

Operator Keep 2026-10-09.

S-elev-a1 · compared with real photo BTL-01 · pose-unlocked, no overlay possible