==== QA cedarwood
PASS page size 180.50 x 231.18 mm
PASS TrimBox = die bbox (8,8)-(172.5,223.18)
PASS BleedBox = Trim +3 mm
PASS dieline == printer template (all 79 segments, worst dev 0.00004 pt)
PASS no raster images
PASS no fonts (all outlined)
PASS no RGB colour operators
PASS spot plates named: Dieline, Emboss, Foil_Gold
PASS foil + emboss use overprint
PASS layers present
PASS dieline + guides do NOT print; artwork/foil/emboss DO
PASS bleed: 2.9 mm ring outside die is fully inked (no white)
PASS no artwork beyond 3 mm bleed
PASS front text: ORGANIC
PASS front text: name
PASS front text: ESSENTIAL OIL
PASS front text: NET
PASS front text: use line
PASS back text: howtouse
PASS back text: cautions
PASS back text: ingredients
PASS back text: productof
PASS back text: distsoldexclusivelyby
PASS back text: monroviaca91016
PASS back text: certifiedorganicbyonecert
PASS back text: net1floz
PASS NET line re-set as type (meta present)
PASS FRONT NET line reads "NET 1 FL OZ (30 mL)" (OCR crop: net1floz(30ml)net1floz(30ml))
PASS FRONT NET cap height 2.30 mm = this design's standard (A 2.30, B 1.92, C 2.20 mm)
PASS BACK NET line says 30 mL, no 29.5 anywhere
PASS back text >= 2.5 mm inside panel edges
PASS back text clears seal (text end 139.2 < seal top 144.8 - 1.5)
PASS front art >= 1.5 mm from left/right fold
PASS front seal matches OFFICIAL USDA B/W seal (IoU 0.969 >= 0.93)
PASS back seal matches OFFICIAL seal (IoU 0.947 >= 0.93)
PASS TEXT: vector ink vs approved render IoU 0.931 >= 0.85
PASS TEXT: top/bottom within 0.2 mm of approved
PASS FOIL SPRIG: vector foil shape vs approved render IoU 0.826 >= 0.80
PASS FOIL SPRIG present (foil area 208 mm2)
PASS background CMYK->sRGB (SWOP) vs approved render dE 2.8 (SWOP gamut-limited; <=30 pass)
PASS ink CMYK->sRGB (SWOP) vs approved render dE 1.0 (SWOP gamut-limited; <=30 pass)
PASS foil on both side panels (P2,P4) - panel rectangles exact
PASS foil layer has content
RESULT cedarwood ALL PASS
