Wonder v35r1 — and why v35 cannot be fixed in Remotion

You said v35 was okay and to fix it to match what we are going with. I did what typography can do — but the honest answer is that v35's problem is not typography.

What changed

Every CTA removed, and the roundel reserve raised so it clears the chrome. Gates all clean.
But not one of the 20 placements could take the drop. I measured the product top on all 20 bare renders: on v35's plates the bottle, the oil pour or the hair reaches so high that there is no position where a headline block clears it. On W05 and W06 the product top measures y=0 — the pour and the brush run off the top edge.
So the type sits on the product on every frame, and always did. v35's own code comments admit it — “the big line crosses the cap tips → soft shadow”, “lines 2–3 cross the caps”, “line 2 meets the cap”. The halo is doing the work.
That is a plate problem, not a Remotion problem. v35's own handoff said the remaining gap was the plates, and v36 is better precisely because it reshot them. To get v35's register onto clean frames the plates have to be regenerated with the product lower — which is what v38's pixel band briefs now do reliably.
So v35r1 is v35 with the CTA gone and the roundel fixed. If you want v35's look properly, say so and I will reshoot its ten plates under the v38 band brief.